Settled concrete may increase wear and tear, cause tripping hazards, and make snow removal difficult. Not to mention, it doesn’t look pleasant! However, you can easily fight sunken or settled concrete by levelling it using foam. The Polyurethane Concrete Foam Raising Process is efficient and quick.
Unlike replacing your entire driveway or sidewalk, raising concrete using foam often takes 1 or 2 hours. The process is effortless and mess-free. This blog will tell you how to level your concrete using foam. All you need to do is follow these steps:
Drilling
One advantage of selecting concrete raising over mud-jacking for concrete repairs is the total size and number of holes you must drill into your cement. It would be best to start by drilling a few 5/8″ holes into the concrete.
Filling
You must pump foam below your sunken concrete using a high-quality tapered delivery port and an injection gun. The foam will fill any gap where the soil under the concrete has washed away or settled.
Raising
After the foam has been successfully injected below your concrete, a chemical reaction will start to expand the foam, raising the concrete. When you hire professionals for concrete repairs, they will carefully raise your concrete till it reaches the desired height.
Clean-Up
Clean-up for foam raising concrete repair is quick and straightforward. All you need to do is fill up the holes using cement and make sure all waste and equipment have been removed from the location.
To Conclude
Now that your concrete structure has reached its desired height, it will take a little longer before you can start using it again. The polyurethane foam only takes 15 minutes to cure. Once done, you can walk, drive, or park on your concrete without causing any damage to the foam. However, if you don’t have enough knowledge about the process, we suggest hiring professionals to help make concrete repairs on your property. They will make sure the job gets done right the first time.
